6L6 Transmitter

We now have enough of the parts to start the 6L6 transmitter project. I began laying out the front panel after cutting it down to size. I drilled the holes to attach it to the chassis. Along with the hole for the key jack. My small drill press does a great job on this kind of stuff.

 I attached the 10 X 8 inch front panel with screws and inserted the key jack port. On the front panel I taped some paper 0-100 dial  templates I made with Adobe Illustrator just to get a idea of the placement of the controls and ma meter.   

Below I arranged the tuning capacitors, coil form socket, tube socket, and crystal socket. On the rear of the chassis I'll mark the positions for the terminal connection strip, SO 239 connector, and ground lug. More to come.....